Overview
Zeno is a small, hand-held device used to treat blemishes. The Zeno device, called the Hot Spot, uses heat to kill the bacteria that cause pimples. The Zeno doesn’t use any chemicals to get rid of the pimples, and nothing has to stay on your face. The short treatment of gentle heat treats the pimple alone. Zeno claims that 90 percent of blemishes fade or disappear within 24 hours of Hot Spot use. Zeno Hot Spot is FDA-approved for the treatment of pimples.
Step 1
Remove the Zeno’s cap. Pull up gently on the cap while pulling down on the colored part of the Zeno until the top comes off.
Step 2
Push the power button to turn on the Zeno. The button is an indention in the middle of the front of the device. When you turn the Zeno on, the power indicator light on the right of the power button turns on, and the Zeno beeps. A row of lights on the left side of the power button indicates how many uses the Zeno has left before it will need recharging.
Step 3
Press the Zeno on your pimple. Once the Zeno turns on, it is ready for immediate use. Center the black circular treatment tip of the Zeno over your pimple, then press it onto the spot.
Step 4
Listen. The Zeno beeps every 30 seconds. The device will beep four times before making the final sounds at two minutes, 30 seconds. While the 30-second indicator beeps are single-tone, the finishing beep is multitone.
Step 5
Remove the Zeno from your blemish after you hear the extended tones indicating the end of the treatment.
